欧文
1
1

1

2
2

2

3
3

3

4
4

4

Ow (Shandong) Metal Abrasives Co., Ltd. 

Ow (Shandong) Metal Abrasives Co., Ltd. is a scientific and technological enterprise integrating R&D, production and sales. By introducing the advanced steel shot and steel grit production technology of OW Group of the United States, and combined with its own original heat treatment process, the products produced not only comply with the national standard GB/T18838.3-2008 but also meet the American SAE standards.

这是描述信息

Production R&D

A modern scientific and technological enterprise integrating scientific research, production and sales, citing the advanced production technology of the American OW Group and combining its own original heat treatment process

 

这是描述信息

Pledge

Customer on-site service, giving abrasive usage methods, helping on-site use to achieve efficient work efficiency, optimizing surface parameters, such as surface cleaning level, roughness, dust level, soluble salt content, etc.

企业介绍
2019 /year
company was founded on
5000 /Ten thousand
Company registered capital
20 /+
The company's main business
12000 /㎡
Plant area

Recommended Products

s50-s170 series superfine steel shot series

s50-s170 series superfine steel shot series

Owen Steel Pills are spherical in appearance, refining using the advanced production technology of the American OW Group, foreign production equipment, and their own original heat treatment process. Steel shot is a commonly used metal surface processing material. It has a tight organization and uniform particle size. It can be used to remove oxide scale on the surface of metal workpieces, sand cleaning of castings, and deburring of parts. After the shot blasting, the workpiece can increase the pressure of the metal surface, and can well improve the fatigue resistance of the workpiece. It can also strengthen the surface while cleaning the workpiece.
Owen Steel Shot has the characteristics of proper hardness, good rebound, high cleaning efficiency, low consumption, and fast cleaning speed. Especially the internal corners and complex-shaped workpieces can be cleaned evenly and quickly, reducing the surface treatment time. It is a good surface treatment material to improve work efficiency. In short: Owen Steel Shot is highly efficient and wear-resistant, which can reduce the overall cost for you.
As a commonly used metal surface treatment material, steel shots have many types and models. For different types of steel shots, the application fields are different, such as aerospace, steel, steel pipes, steel structures, automobiles, shipbuilding, casting, forging, Hardware tools, stone processing, gear strengthening and other fields.
Creating an industry pioneer and making excellent products is the unremitting pursuit of Irving!

read more

s230-s460 conventional steel shot series

s230-s460 conventional steel shot series

Owen Steel Pills are spherical in appearance, refining using the advanced production technology of the American OW Group, foreign production equipment, and their own original heat treatment process. Steel shot is a commonly used metal surface processing material. It has a tight organization and uniform particle size. It can be used to remove oxide scale on the surface of metal workpieces, sand cleaning of castings, and deburring of parts. After the shot blasting, the workpiece can increase the pressure of the metal surface, and can well improve the fatigue resistance of the workpiece. It can also strengthen the surface while cleaning the workpiece.
Owen Steel Shot has the characteristics of proper hardness, good rebound, high cleaning efficiency, low consumption, and fast cleaning speed. Especially the internal corners and complex-shaped workpieces can be cleaned evenly and quickly, reducing the surface treatment time. It is a good surface treatment material to improve work efficiency. In short: Owen Steel Shot is highly efficient and wear-resistant, which can reduce the overall cost for you.
As a commonly used metal surface treatment material, steel shots have many types and models. For different types of steel shots, the application fields are different, such as aerospace, steel, steel pipes, steel structures, automobiles, shipbuilding, casting, forging, Hardware tools, stone processing, gear strengthening and other fields.
Creating an industry pioneer and making excellent products is the unremitting pursuit of Irving!
Alloy steel shot: S230 (S0.6):
Small castings, forgings, heat treatments, aluminum-steel alloy castings, steel plates, strips, steel pipes, etc. remove sand to remove oxide scales, springs, stone cutting, chain surface strengthening and grinding.
Alloy steel shot: S230 (S0.6) Features:
1. The metallographic structure of the alloy cast steel shot is tight and the particle size is uniform, which can eliminate the stress and improve the surface strength of the workpiece.
2. Steel shot has good resilience when cleaning work pieces, fast cleaning speed and low consumption.
3. The steel shot has moderate hardness, good toughness, impact resistance, and can be recycled.
Alloy steel shot: S230 (S0.6) Application range:
Precision casting sand cleaning, marble surface cleaning, ceramic cleaning, non-ferrous metal surface cleaning, etc.
Applicable equipment: Q326 crawler drum type shot blasting machine Q3110 drum type shot blasting machine Q37 hook type shot blasting machine.

read more

s550-s930 large model steel shot series

s550-s930 large model steel shot series

Owen Steel Pills are spherical in appearance, refining using the advanced production technology of the American OW Group, foreign production equipment, and their own original heat treatment process. Steel shot is a commonly used metal surface processing material. It has a tight organization and uniform particle size. It can be used to remove oxide scale on the surface of metal workpieces, sand cleaning of castings, and deburring of parts. After the shot blasting, the workpiece can increase the pressure of the metal surface, and can well improve the fatigue resistance of the workpiece. It can also strengthen the surface while cleaning the workpiece.
Owen Steel Shot has the characteristics of proper hardness, good rebound, high cleaning efficiency, low consumption, and fast cleaning speed. Especially the internal corners and complex-shaped workpieces can be cleaned evenly and quickly, reducing the surface treatment time. It is a good surface treatment material to improve work efficiency. In short: Owen Steel Shot is highly efficient and wear-resistant, which can reduce the overall cost for you.
As a commonly used metal surface treatment material, steel shots have many types and models. For different types of steel shots, the application fields are different, such as aerospace, steel, steel pipes, steel structures, automobiles, shipbuilding, casting, forging, Hardware tools, stone processing, gear strengthening and other fields.
Creating an industry pioneer and making excellent products is the unremitting pursuit of Irving!
Alloy steel shot: S550 (S1.7):
Sand removal, forgings, heat treatments, steel plates, steel pipes and steel pipes of large and medium castings, rust strengthening, surface treatment before coating, stone cutting
Alloy steel shot: S550 (S1.7) Features:
1. The metallographic structure of the alloy cast steel shot is tight and the particle size is uniform, which can eliminate the stress and improve the surface strength of the workpiece.
2. Steel shot has good resilience when cleaning work pieces, fast cleaning speed and low consumption.
3. The steel shot has moderate hardness, good toughness, impact resistance, and can be recycled.
Alloy steel shot: S550 (S1.7) Application range:
Sand cleaning for large castings, derusting of steel structure surface, anticorrosion and derusting of bridges, anticorrosion and derusting of ships, etc.
Applicable equipment: pass-through shot blasting machine, steel plate pretreatment line, hook type shot blasting machine, large-scale blasting room.

read more

s50-s930 custom steel shot series

s50-s930 custom steel shot series

Owen Steel Pills are spherical in appearance, refining using the advanced production technology of the American OW Group, foreign production equipment, and their own original heat treatment process. Steel shot is a commonly used metal surface processing material. It has a tight organization and uniform particle size. It can be used to remove oxide scale on the surface of metal workpieces, sand cleaning of castings, and deburring of parts. After the shot blasting, the workpiece can increase the pressure of the metal surface, and can well improve the fatigue resistance of the workpiece. It can also strengthen the surface while cleaning the workpiece.
Owen Steel Shot has the characteristics of proper hardness, good rebound, high cleaning efficiency, low consumption, and fast cleaning speed. Especially the internal corners and complex-shaped workpieces can be cleaned evenly and quickly, reducing the surface treatment time. It is a good surface treatment material to improve work efficiency. In short: Owen Steel Shot is highly efficient and wear-resistant, which can reduce the overall cost for you.
As a commonly used metal surface treatment material, steel shots have many types and models. For different types of steel shots, the application fields are different, such as aerospace, steel, steel pipes, steel structures, automobiles, shipbuilding, casting, forging, Hardware tools, stone processing, gear strengthening and other fields.
Creating an industry pioneer and making excellent products is the unremitting pursuit of Irving!

read more

G200-G10 steel grit series

G200-G10 steel grit series

Owen steel grit, angular appearance, broken from selected Owen spherical steel shots. It is a commonly used metal surface processing material. It is mainly used in air-driven sandblasting machines. The angle of steel sand is sharp, the hardness is moderate, and the particle size is uniform. It can effectively remove the scale on the surface of the metal workpiece and make the surface of the workpiece Producing suitable roughness is conducive to the adhesion and adhesion of subsequent paint films. Owen steel grit has undergone a special modulation heat treatment, so the consumption is low and the cleaning speed is fast, which can greatly shorten the surface treatment time of the workpiece. It is a very good surface treatment material. In short: Irving steel grit is highly efficient and wear-resistant. On the premise of meeting your needs, it reduces the overall cost for you.
As a commonly used metal surface treatment material, steel sand has a wide range of types. For different types of steel sand, the application fields are different, such as shipyards, steel companies, steel pipe corrosion protection, auto parts, foundries, forging plants, hardware tools Industry, stone processing and other fields.
Creating an industry pioneer and making excellent products is the unremitting pursuit of Irving!
Round steel shot
This product is a spherical hypereutectoid steel (C ≥ 0,85%) steel ball after quenching and tempering treatment. The perfectly controlled heat treatment gives this product the best elasticity and fatigue resistance.
This type of steel shot is widely used, and is suitable for various applications that require a rebound effect or strengthening effect.
Angular steel grit
The angular cast steel grit is made by crushing large steel balls after special heat treatment. This product is used for blast cleaning or surface treatment.
GP steel grit
This product is made by quenching and tempering treatment. The new product is angular and can be quickly rounded in use, especially suitable for rust removal.
GL steel grit
This product is made by quenching and tempering treatment. Although its hardness is higher than GP steel grit, the sharp edges of GL steel grit will also be rounded during the sandblasting process, which is especially suitable for rust removal and surface treatment applications. .
GH steel grit
GH steel grit is quenched, so it has the maximum hardness and always maintains corners during the operation. This product is particularly effective when used in the surface treatment process and can achieve a uniform etching surface effect.
Most of the air compressors are required for use.
G16 (S1.4) steel grit characteristics:
1. Angular steel grit is crushed by alloy steel shots, hypereutectoid steel angular, polyhedron.
2. Made by grinding through special heat treatment, it has high hardness, toughness and impact resistance.
3. The angular steel grit can be used repeatedly, with strong adhesion, and clean the workpiece thoroughly.
4. The metallographic structure of the angular steel grit is tight, and the angularity is always maintained during the blasting operation.
G16 (S1.4) steel sand application scope:
Sand removal, forging, heat treatment, steel plate, steel pipe section steel of large and medium castings, rust strengthening, surface treatment before coating, stone cutting.
Applicable equipment for G16 (S1.4) steel grit:
Used in various blasting rooms.

read more

G200-G10 custom steel grit series

G200-G10 custom steel grit series

Owen steel grit, angular appearance, broken from selected Owen spherical steel shots. It is a commonly used metal surface processing material. It is mainly used in air-driven sandblasting machines. The angle of steel sand is sharp, the hardness is moderate, and the particle size is uniform. It can effectively remove the scale on the surface of the metal workpiece and make the surface of the workpiece Producing suitable roughness is conducive to the adhesion and adhesion of subsequent paint films. Owen steel grit has undergone a special modulation heat treatment, so the consumption is low and the cleaning speed is fast, which can greatly shorten the surface treatment time of the workpiece. It is a very good surface treatment material. In short: Irving steel grit is highly efficient and wear-resistant. On the premise of meeting your needs, it reduces the overall cost for you.
As a commonly used metal surface treatment material, steel sand has a wide range of types. For different types of steel sand, the application fields are different, such as shipyards, steel companies, steel pipe corrosion protection, auto parts, foundries, forging plants, hardware tools Industry, stone processing and other fields.
Creating an industry pioneer and making excellent products is the unremitting pursuit of Irving!
Round steel shot
This product is a spherical hypereutectoid steel (C ≥ 0,85%) steel ball after quenching and tempering treatment. The perfectly controlled heat treatment gives this product the best elasticity and fatigue resistance.
This type of steel shot is widely used, and is suitable for various applications that require a rebound effect or strengthening effect.
Angular steel grit
The angular cast steel grit is made by crushing large steel balls after special heat treatment. This product is used for blast cleaning or surface treatment.
GP steel grit
This product is made by quenching and tempering treatment. The new product is angular and can be quickly rounded in use, especially suitable for rust removal.
GL steel grit
This product is made by quenching and tempering treatment. Although its hardness is higher than GP steel grit, the sharp edges of GL steel grit will also be rounded during the sandblasting process, which is especially suitable for rust removal and surface treatment applications. .
GH steel grit
GH steel grit is quenched, so it has the maximum hardness and always maintains corners during the operation. This product is particularly effective when used in the surface treatment process and can achieve a uniform etching surface effect.
Most of the air compressors are required for use.
G50 (S0.4) steel grit characteristics:
1. Angular steel grit is crushed by alloy steel shots, hypereutectoid steel angular, polyhedron.
2. Made by grinding through special heat treatment, it has high hardness, toughness and impact resistance.
3. The angular steel grit can be used repeatedly, with strong adhesion, and clean the workpiece thoroughly.
4. The metallographic structure of the angular steel grit is tight, and the angularity is always maintained during the blasting operation.
G50 (S0.4) steel grit application range:
Small castings, forgings, heat treatments, aluminum-steel alloy castings, steel plates, strips, steel pipes, etc. remove sand to remove oxide scales, springs, stone cutting, chain surface strengthening and grinding.
Applicable equipment for G50 (S0.4) steel grit:
Used in various blasting rooms.

read more

CW0.3-CW5.0 steel wire cutting shot series

CW0.3-CW5.0 steel wire cutting shot series

Steel wire cutting shot: It is the pellet cut by using steel wire. According to the different steel wire used, it is divided into steel wire cutting shot and steel wire cutting shot grinding shot. It has the characteristics of long service life, high surface brightness and low wear of equipment.
Owen steel wire cutting pellets are made of selected alloy steel wires. After cold drawing to obtain a uniform diameter, after heat treatment to obtain a suitable hardness and metallographic structure, they are cut into uniform pellets with special equipment, and can be angled according to different application requirements. Passivation and rounding treatment can be applied to shot peening in many fields.
Owen's steel wire shot is strictly in accordance with the German VDFI8001/2009 (Germany) and the US SAE J441, AMS2431 standards, on the basis of the traditional process, through research and development and innovation, the mechanical properties of the steel wire shot are higher, more stable, and the internal organization is more Dense; in addition, the steel wire cutting and grinding pills completely rely on the passivation process of the shot, which reduces the damage of the pellet itself during the shot and improves the service life. It is fully suitable for the G1 grade of the spring industry, the G2 grade of the gear industry, and the G3 for the aviation industry grade.
Type and characteristics of steel wire cutting shot:
Product type: 1.0mm, 1.5mm, 2.0mm, 2.5mm
Product features: high hardness, steel wire cutting, no air holes, high durability
Production standard of steel wire shot:
It is produced strictly according to the "SAE J441 Standard" of the American Society of Automotive Engineers and the "JB/T 8354-1996 Steel Wire Shot Pill Standard" of the machinery industry of the People's Republic of China. However, due to the use of recycled wire, its length is slightly different from the standard.
Application range of steel wire cutting shot:
1. Steel wire shot peening: shot peening, heat treatment shot peening, gear shot peening.
2. Steel wire shot peening: steel shot peening, steel shot peening, shipboard shot peening, steel shot peening, steel shot peening.
3. Steel wire shot blasting cleaning: shot blasting cleaning, shot blasting cleaning, die casting cleaning, casting blasting cleaning, forging shot blasting cleaning, forging shot blasting casting sand cleaning steel plate cleaning, steel cleaning, steel plate cleaning, H-beam cleaning, steel Structural cleanup.
4. Steel wire cutting rust removal: shot blasting blasting, shot blasting rust removal, casting rust removal, forgings rust removal steel plate rust removal, forgings rust removal, steel rust removal, H-section steel rust removal steel structure rust removal.
5. Sandblasting with steel wire cutting shot: sanding treatment.
6. Pre-treatment of steel wire pellets: pre-treatment for painting, pre-treatment for painting, surface pre-treatment, ship plate pre-treatment, steel pre-treatment, steel pre-treatment, steel plate pre-treatment, steel structure pre-treatment.
7. Steel wire shot blasting: steel plate shot blasting, steel shot blasting, steel shot blasting.
Applicable equipment for steel wire cutting:
Steel wire shot blasting is an abrasive used in steel pretreatment production line, steel plate pretreatment production line, steel structure pretreatment production line, shot blasting machine, shot blasting equipment, shot blasting machine, shot blasting equipment, sand blasting machine, sand blasting equipment.

read more

S0.3-S2.0 stainless steel shot series

S0.3-S2.0 stainless steel shot series

Product Name: Stainless Steel Pills The first category is also known as: stainless steel shot blasting, round stainless steel wire cutting shot, stainless steel steel shot, round stainless steel wire cutting shot production process: stainless steel shots are made by cutting and rounding stainless steel wire to get stainless steel shots 、Stainless steel shot blasting, English name: "Conditioned Stainless Steel Cut Wire Shot", literally translated as: "passivated stainless steel cut wire shot", where passivation represents the rounded corners of the cylindrical ends; stainless steel wire represents the raw material; cut Pills are made by cutting. To this end, Germany and the International Organization for Standardization have specially formulated the corresponding second method to produce and stipulate that the sphericity of the stainless steel pellets after the cylindrical stainless steel wire cut pellets are passivated by shot blasting are indicated by G1, G2, and G3 marks, respectively. The second category: cast stainless steel pellets obtained by smelting and atomizing cooling.
Features:
a moderate hardness, pure ingredients, large coverage;
b. It has no shortcomings such as porosity and special shapes of cast steel shots, and its service life is longer;
c The performance of this product can completely replace imported products, and the price is significantly lower than imported products, saving customers costs, and the consumption of 1 kg of stainless steel pellets is equivalent to the consumption of 17 kg of gold steel sand and the consumption of 100 kg of glass beads; It is equivalent to 3-4 kg of ordinary steel shot; it is equivalent to 3 kg of aluminum shot and zinc shot;
d. After being treated with stainless steel pellets, the surface of the casting is smooth and does not rust, the waste disposal cost is low, the dust during the shot blasting process is small, and no post-treatment such as pickling is required, which is beneficial to environmental protection.
You can choose pre-polished round cut pellets and non-pre-polished pellets, two different shapes of products.

read more

APPLICATION

Products are widely used in aerospace, steel, automobile, shipbuilding, stone, hardware tools, electronic components and other industries

Aerospace

Steel

Car

Casting

Construction machinery

Surface strengthening

 

hardware toolsn

Stone cutting

NEWS CENTER

Company News / Industry News                                                                         

More

Cast steel shots are widely used in life
Cast steel shots are widely used in life
Time of issue : 2019-11-12 11:51:00
Cast steel shots are naturally formed by scraping steel through centrifugal furnace heating and centrifugal atomization. Cast steel grit is scrap steel broken by steel shots.
See more information
Cast steel shots are naturally formed by scraping steel through centrifugal furnace heating and centrifugal atomization. Cast steel grit is scrap steel broken by steel shots.

Job Offers

More

There is currently no information to display
Please add data record on website background.
logo

Contact Us

Ow (Shandong) Metal Abrasives Co., Ltd.

13869172015

Address: No. 21, North Industrial Road, Licheng District, Jinan City, Shandong Province

Phone: Manager Hu

二维码

mobile station